What brand of hot water bag good

1Plug the power cord into the socket of the electric kettle, then plug the connector into the mains. Be sure to plug in tightly before turning on the power. Remember not to use when charging.

2. The indicator light is on when the power is on, and the indicator light is off when charging. Unplug the connector from the power supply first, then unplug the power cord from the hot water bag and plug in the electric hot water bag to warm your hands and be warm. You can also unplug the power cord, without having to wait until the indicator light goes off and then use as needed.

3. If the surface temperature of the silicone hot water bag is found to be significantly too high, the bag body is significantly expanded, or abnormal conditions (such as abnormal noise, smell, smoke, etc.) occur during charging, please unplug the power cord immediately and stop using it to prevent danger.

4. It is strictly prohibited to punch, press or break on the surface of the electric kettle. When charging the electric kettle, pay attention to:① Insert the plug into the socket of the storage type electric kettle first, then turn on the power. When the bag body rises slightly, first cut off the power supply, then unplug the bag, wait until all the remaining air in the bag is discharged, continue charging until the injection port has water seeping out, hand warmer custom until it reaches the prescribed temperature. ② general charging time of 5-10 minutes, the length of time can be freely controlled. Green light off red light on, indicating that the set temperature, should immediately unplug the power cord! The actual use of the handle heat prevails, do not have to wait for the temperature control device action. When the package rises, immediately unplug the power cord!